PPM sensors and alarm problem OWS XOC-01

PPM sensors and alarm problem OWS XOC-01

PPM sensors and alarm problem OWS XOC-01

Specification Equipment:

  • Brand XOC-01Product Prohibited Discharge of Oil

Error Issue

  1. Ppm sensors does not detect correctly,
  2. Alarms delay overlong (8s).
  3. Note: Problems that occur at the site / ship: the system is problematic not only on OWS units only, but has entered into units of general alarm in the ECR. For example, the response is too long pulse of OWS unit coming into the CPU, multiple units of floating switches are not terespon quickly by the CPU. Need check of operation general alarm CPU unit at ECR.

Solution Resulting :

  • PPM Sensors
    • Need to do the calibration,
  • Alarm
    • Need setting of alarm delay so that faster response
  • Need to check further into the CPU unit for general alarm.

Documentation

XOC-01 Unit
XOC-01 Unit
Electronic Section XOC-01 Unit
Electronic Section XOC-01 Unit
Monitor General Alarm Unit at ECR
Monitor General Alarm Unit at ECR
CPU Unit for General Alarm at ECR
CPU Unit for General Alarm at ECR

Share this: